The EZ VPNTM Corporate IT solution is a "hassle-free"
VPN service that allows you to connect to any of your remote
networks with a simple 3 step setup; we take care of any
configuration on your behalf.
Using EZ VPNTM, you can access your webcams, printers,
computers, alarm systems, and any device that can be obtained
by an IP connection. No need to open ports on your router,
expose services, set up port forwarding, natting, or complicated configurations.
Yes and without any limitations on devices. However,
you cannot use it simultaneously. Each certificate is
meant to be used by a single user. If you need to have
two or more devices simultaneously connected you need
to create one for each device.
Generally speaking, yes, it works wherever you can wire
your PC with an Ethernet cable and browse the Internet.
Specifically, what you need is a DHCP server in your LAN
(if you do not know what a DHCP server is, you probably
are already using it in your router) outgoing access to
TCP ports 80, 443 and high UDP ports. Some company routers
block outgoing UDP traffic.
These are very generic requirements and fulfilled by almost
every SOHO Internet router. However, if you are going to put
an EZ BoxTM in your office, make sure your IT
department is not blocking or proxying UDP traffic.
No. EZ VPNTM is not a browsing VPN service.
There are lots of excellent ones for that. Our goal
is to let you IN your premises, not to let you OUT.
Our service is also the perfect to reach your customers
if you are an IT professional guy, or need to access your
remote control panels if you are a machine manufacturer.
Just drop an EZ BoxTM in your Ethernet switch,
and you can access your devices 24/7 from any device
anywhere in the world.
Your external servers accessible only from your office
are considered as your other internal resources as well.
With EZ VPNTM you can set up additional networks
(local or remote) to be reached through your VPN
connection (not included in all plans).
Yes, you can upgrade or downgrade your current plan.
However, in case of a plan change, your current plan won’t be extended; when changing, the current plan will be disabled and substituted by the new one, therefore, losing the remaining subscription time available.
For the EZ BoxTM 1, it must be powered on, and the two left LED lights must be solid green.
During the first boot, it can take up to five minutes to complete the auto upgrade procedure.
If the center LED is still blinking after 5 minutes, you probably have a communication issue; try to connect a PC to the same Ethernet cable you are using for EZ BoxTM and make sure you can browse the Internet.
For the EZ BoxTM 2, it must be powered on, and the LED1 light must be blinking green.
If the LED1 is blinking orange and fast, you probably have a communication issue; try to connect a PC to the same Ethernet cable you are using for EZ BoxTM and make sure you can browse the Internet.
Left LED: Power status. If solid green, your EZ BoxTM is powered on.
Center LED: Internet connection status. If solid green, your EZ BoxTM is connected to the Internet. If blinking, it is trying to connect. Please note that at each boot, it will take about two minutes to get a solid green LED.
Right LED: VPN connection status. If off, there is no VPN connection. If solid red, VPN connection is okay. If blinking red, VPN connection is okay, and traffic is flowing through the VPN.
For EZ BoxTM 2
Left LED: Power status. If solid green, your EZ BoxTM 2 is powered on. If solid orange, your EZ BoxTM 2 is powered off.
LED1: Internet connection status. If heartbeat green, your EZ BoxTM 2 is connected to the Internet. If blinking fast orange, it is trying to connect. Please note that at each boot, it will take about two minutes to get the heartbeat green LED.
LED2: VPN connection status. If off, there is no VPN connection. If heartbeat green, VPN connection is okay. If blinking fast orange, VPN connection cannot be established, please check your firewall if it is blocking outgoing connections.
Data stash is a safety data bucket, automatically used when your EZ BoxTM runs out of data traffic available.
Each of your EZ BoxTM has a limited monthly data plan. If you use all your available data before the end of the month, your EZ BoxTM will be stopped. Moreover, it will remain disabled until the current month is over.
If you run critical operations and you do not want to risk having your connections not available, you can fill your data stash in advance.